Yaesu FT-1900E Operating Manual

48 FT-1900E OPERATING MANUALMEMORY B ANK L INK S CANWhen the Memory Bank feature is engaged, the scanner sweeps only memory channels inthe current Memory Bank. However, if the Memory Bank Link Scan feature is enabled, youmay sweep the memory channels in several Memory Banks which you have selected.To enable the Memory Bank Link Scan feature:1. Set the radio to the Memory mode by pressing the [D/MR(MW)] key, if necessary.2. Press and hold in the [MHz(SET)] key for one second, thenrotate the DIAL knob to select “8 BNK.LNK.”3. Press the [MHz(SET)] key momentarily, then rotate the DIAL knob to select the firstMemory Bank (“b1” ~ “b8”) you wish to sweep usingMemory Bank Link Scan.4. Press the [D/MR(MW)] key momentarily. A “SKIP” icon will blink above the MemoryBank number, indicating this Memory Bank will now beswept during Memory Bank Scan.5. Repeat steps 3 and 4 above, to append the blinking “SKIP”icon to any other Memory Banks you wish to sweep.6. Now, press and hold in the [MHz(SET)] key for one second to initiate the MemoryBank Link Scan.7. To remove a Memory Bank from the Memory Bank Link Scan, repeat steps 2 - 4 above,to delete the blinking “SKIP” icon from the Memory Bank number indication.S CANNING