Yaesu FT-950 Operating Manual

Also see for FT-950: Brochure & specs Reference Manual Update Update

Page 82 FT-950 OPERATING M ANUALCW CONVENIENCE F EATURESCONTEST MEMORY KEYER (U SING THE OPTIONAL FH-2 REMOTE C ONTROL K EYPAD)You may also utilize the CW message capability of the FT-950 from the optional FH-2 Remote Control Keypad, whichplugs into the rear panel REM jack.Message MemoryFive memory channels capable of retaining 50 characters total are provided (using the PARIS standard for characters andword length).Example: CQ CQ CQ DE W6DXC K (19 characters)Contest Number ProgrammingUse this process if you are starting a contest, or if you somehow get out of sync with the proper number in themiddle of a contest.S TORING A MESSAGE INTO MEMORY1. Press the [MENU] button to enter the Menu mode.2. Rotate the [SELECT] knob to select the CW MemoryRegister into which you wish to store the message; fornow, we are just setting the message entry technique to(Keyer entry).019 KEY CW MEM1019 KEY CW MEM1019 KEY CW MEM1019 KEY CW MEM1019 KEY CW MEM1020 KEY CW MEM2020 KEY CW MEM2020 KEY CW MEM2020 KEY CW MEM2020 KEY CW MEM2021 KEY CW MEM3021 KEY CW MEM3021 KEY CW MEM3021 KEY CW MEM3021 KEY CW MEM3022 KEY CW MEM4022 KEY CW MEM4022 KEY CW MEM4022 KEY CW MEM4022 KEY CW MEM4023 KEY CW MEM5023 KEY CW MEM5023 KEY CW MEM5023 KEY CW MEM5023 KEY CW MEM5ADVICE:Press the [SELECT] knob momentarily to toggle theMenu item display between “Menu Item Number &Group Name” and “Menu Function”.3. Rotate the [CLAR/VFO-B] knob to set the selectedCW Memory Register to “tyP2tyP2tyP2tyP2tyP2”. If you want to usetext message entry on all memories, set all five Menuitems (#019 ~ 023) to “tyP2tyP2tyP2tyP2tyP2”.4. Press and hold in the [MENU] button for one secondto save the new settings and exit.[CLAR/VFO-B] Knob[MENU] Button[SELECT] Knob1. Press the [MENU] button to enter the Menu mode.2. Rotate the [SELECT] knob to select Menu item“018 KEY CONTEST018 KEY CONTEST018 KEY CONTEST018 KEY CONTEST018 KEY CONTEST”. The current contest num-ber appears in the Multi-Display Window on thedisplay.ADVICE :Press the [SELECT] knob momentarily to togglethe Menu item display between “018 KEY018 KEY018 KEY018 KEY018 KEY” and“CONTESTCONTESTCONTESTCONTESTCONTEST”.3. Rotate the [CLAR/VFO-B] knob to set the Con-test Number to the desired value.ADVICE :Press the [CLEAR] button (located at the upperright of the [SELECT] knob) to reset the ContestNumber to “1”.4. Press and hold the [MENU] button for one secondmore to store the new number and exit.[CLAR/VFO-B] Knob[MENU] Button[CLEAR] Button[SELECT] Knob