Yaesu FT3DR Instruction Manual

Also see for FT3DE: Operating manual Manual Instruction manual Instruction manual Operating manual

Contents

10Connecting to a node or room on the InternetYou can connect to the desired node or room in one of the following ways:• Selecting an accessible node or room from the list• Specifying the node name or room name• Selecting the most recently connected node or room• Specifying the DTMF ID of the node or room you want to connect toz Searching from the node & room lists1 While displaying the local node, touch [SEARCH &DIRECT].Displays the category list.SEARCH & DIRECTJQ1YBG-ND1 Shinagawa-2 Touch [ALL].Displays the list of accessible nodes and rooms.Tips • Connection destinations are displayed from the room listand then node list.• On the connection destination room columns, thenumber of activities (the number of nodes connected toeach room) appears on the right side.C1:----------------C2:----------------C3:----------------C4:----------------C5:----------------3 Touch the node or room you want to connect to.Starts connection.Tip Rotate the DIAL to select the node or room you want toconnect, then press PTT to establish a connection .CQ-OPEN-ROOM 194JA1YOE-TKY-ROOM 21JA1YOE-ROOM-B 16JA1YOE-ROOM-C 9JQ1YBG-13-ROOM-B 8ALL [999]Once connection is successfully established, themenu list of the node (room) you are connected to willappear.Tip If connection is unsuccessful, an error message appearsand the screen returns to the list of nodes and rooms.JA1YOE-TKY-ROOMNEWS STATIONEMERGENCYLOCAL NEWSINT NEWS