36WIRES-X Setting Mode MenusWIRES-X setting mode listMenu/Item Functions Setting items(Bold items are default settings.)1 RPT/WIRES FREQ Setting the operating frequenciesfor repeaters/WIRES-X MANUAL/PRESETSetting preset frequencies Depends on the transceiver version.2 SEARCH SETUP Setting the item order on the node& room lists HISTORY / ACTIVITY3 EDIT CATEGORY TAG Deleting registered nodes/rooms C1 to C54 REMOVE ROOM/NODE Deleting registered nodes/rooms C1 to C51 to 20 in total in each category5 DG-ID Setting the DG-ID AUTO / 01 to 99Using the WIRES-X setting modeSetting the operating frequencies for repeaters/WIRES-XSelect whether to set the frequency manually or use the preset (registered in advance)frequency when connecting to a local node.1 Press and hold the [DISP] key → Touch [WIRES-X] → [1 RPT/WIRES FREQ].2 Rotate the DIAL to select [MANUAL] or [PRESET].Every time the DIAL is rotated, the setting switchesbetween [MANUAL] and [PRESET].MANUAL: Set the frequency every time you look fora local node.PRESET: Preset the frequency you use to look forthe local node.3 Selecting [PRESET] and pressing the [DISP] keydisplays the frequency select screen.1 RPT/WIRES FREQMANUAL4 Rotate the DIAL to select the frequency you want topreset.Tips • Rotating the DIAL changes the frequency by theincrements specified in setting mode.• Touching [BAND] switches the band of the presetfrequency.1 RPT/WIRES FREQPRESET: 145.375 MHz5 Press the PTT.Sets the frequency and returns the screen to the frequency display screen.