Yaesu FT3DR Instruction Manual

Also see for FT3DE: Operating manual Manual Instruction manual Instruction manual Operating manual

Contents

18Connecting to analog nodesWhen the node you want to connect to is an analog station, use the DTMF function onthe transceiver. For details on how to use the DTMF function, refer to “DTMF Operation”in the Advance Manual.Connecting to nodes or rooms on the Internet1 Set the main band frequency to the local node frequency.2 Touch [MODE] to switch to analog FM mode.Tip For details, refer to “Selecting the Communication Mode” in the basic operating manual.3 While pressing the PTT, touch [DTMF] displayed onthe screen.Displays the numeric keypad.4 Touch the DTMF ID key (#) followed by the 5 digits ofthe room or node you want to connect with.5 Release the PTT, and keep the transceiver in reception mode for about 10 seconds.Once connection is established, you will be able to hear audio.Caution The connection destination screen does not appear.TipYou can store DTMF codes consisting of up to 16 digits for 10 channels on the transceiver. If youregister the codes of frequently-used connection destinations in advance, you can easily transmit acode by pressing its abbreviated number while pressing the PTT. For details, refer to “DTMF Operation”in the Advance Manual.