Yamaha 150F Owner's Manual

Also see for 150F: Owner's manual Service manual Owner's manual

Basic components11EMU26011Choke knob for pull typeTo supply the engine with the rich fuel mix-ture required to start, pull out this knob.EMU26090Main switchThe main switch controls the ignition system;its operation is described below. “ ” (off)With the main switch in the “ ” (off) posi-tion, the electrical circuits are off, and the keycan be removed. “ ” (on)With the main switch in the “ ” (on) posi-tion, the electrical circuits are on, and the keycannot be removed. “ ” (start)With the main switch in the “ ” (start) po-sition, the starter motor turns to start the en-gine. When the key is released, it returnsautomatically to the “ ” (on) position.EMU26141Power trim and tilt switch on remotecontrol or tiller handleThe power trim and tilt system adjusts theoutboard motor angle in relation to the tran-som. Pressing the switch “ ” (up) trims theoutboard motor up, then tilts it up. Pressingthe switch “ ” (down) tilts the outboard mo-tor down and trims it down. When the switchis released, the outboard motor will stop in itscurrent position.NOTE:For instructions on using the power trim andtilt switch, see pages 35 and 37.EMU26151Power trim and tilt switch on bottomengine cowlingThe power trim and tilt switch is located onthe side of the bottom engine cowling. Press-ing the switch “ ” (up) trims the outboardZMU03903ONOFF START ONOFF STARTZMU04566