Yamaha 150F Owner's Manual

Also see for 150F: Owner's manual Service manual Owner's manual

Basic components16EMU26650Hour meter (digital type)This meter shows the number of hours theengine has been run. It can be set to showthe total number of hours or the number ofhours for the current trip. The display canalso be turned on and off. Changing the display format Pressing the “ ” (mode) button chang-es the display format in the following pat-tern: Total hours→Trip hours→Display off Resetting the trip hours Simultaneously pressing the “ ” (set)and “ ” (mode) buttons for more than1 second while the trip hours are displayedresets the trip counter to 0 (zero).NOTE:The total number of hours the engine hasbeen run cannot be reset.EMU26690Trip meterThis gauge displays the distance the boathas traveled since the gauge was last reset.Press the “ ” (mode) button repeatedlyuntil the indicator on the face of the gaugepoints to “ ” (trip). To reset the trip meterto zero, press the “ ” (set) and “ ”(mode) buttons at the same time.NOTE: The trip distance is shown in kilometers ormiles depending upon the unit of measure-ment selected for the speedometer. The trip distance is kept in memory by bat-tery power. The stored data will be lost ifthe battery is disconnected.EMU26700ClockPress the “ ” (mode) button repeatedlyuntil the indicator on the face of the gaugepoints to “ ” (time). To set the clock, besure the gauge is in the “ ” (time) mode.Press the “ ” (set) button; the hour displaywill begin blinking. Press the “ ” (mode)button until the desired hour is displayed.Press the “ ” (set) button again, the minutedisplay will begin blinking. Press the “ ”(mode) button until the desired minute is dis-played. Press the “ ” (set) button again tostart the clock.ZMU01870