8 - 59CHASFRONT ARMS AND FRONT SHOCK ABSORBERc. Install the body 3, long bolt 4, removerwasher 5 and remover spacer 6 onto balljoint.NOTE:Remover washer 5 must be aligned with theprojection on the head of the ball joint.d. Hold the body 3 in place while turning inthe long bolt 4 to remove the ball joint 0from the front lower arm.e. Remove the ball joint remover/installer.f. Install the long bolt 4, installer spacer 8and installer guide 9 onto the body 3.g. Attach the assembled ball joint remover/installer, new ball joint A and installerattachment 7 to the front lower arm B.NOTE:Do not tap or damage the top of the ball joint.h. Hold the body 3 in place while turning inthe long bolt 4 to install the new ball jointA into the front lower arm B.i. Remove the ball joint remover/installer.Ball joint remover/installer setP/N. 90890-01474Ball joint adapter setP/N. YM-01474Ball joint remover/installer attach-ment setP/N. YM-014773 Body YM-0147490890-014744 Long bolt YM-0147490890-014745 Remover washer YM-014776 Remover spacer YM-014777 Installerattachment YM-014778 Installer spacer YM-014779 Installer guide YM-01477www.midwestmanuals.com
