3 - 13CHKADJMEASURING THE COMPRESSION PRESSURE/CHECKING THE ENGINE OIL LEVELWARNINGWhen cranking the engine, ground thespark plug lead to prevent sparking. 8. Install:• spark plug9. Lower the cargo bed.T R..18 Nm (1.8 m · kg, 13 ft · lb)CHECKING THE ENGINE OIL LEVEL1. Place the vehicle on a level surface.2. Remove:• driver seat• passenger seat• consoleRefer to “SEATS, ENCLOSURE, HOODAND CARGO BED” in chapter 8.3. Check:• engine oil levelOil level should be between the maximum1 and minimum 2 marks.Oil level low → Add oil to the proper level.NOTE:Do not screw the dipstick 3 in when checkingthe oil level.NOTE:Recommended oil classification:API Service “SE”, “SF”, “SG” type or equiva-lent (e.g. “SF—SE—CC”, “SF—SE—SD” etc.)CAUTION:Do not allow foreign material to enter thecrankcase.4. Start the engine and let it warm up for sev-eral minutes.Recommended oilFollow the left chart.0° 10° 30° 50° 70° 90° 110°-20° -10° 0° 10° 20° 30° 40°130°F50°CYAMALUBE 4 (20W40) or SAE 20W40YAMALUBE 4 (10W30) or SAE 10W30SAE 5W30www.midwestmanuals.com
