Yamaha 20C Owner's Manual

Also see for 20C: Service manual Owner's manual

5-7GB2080526) Insert the knotted end of the emer-gency starter rope into the notch inthe flywheel rotor and wind the ropeseveral turns clockwise.7) Give a strong pull straight out tocrank and start the engine. Repeat ifnecessary.EMU00950Emergency Starting Engine1) Remove the top cowling.2) Remove the start-in-gear protectioncable from the starter if equipped it.3) Remove the starter/flywheel coverafter removing the bolt(s).208025ON STARTOFF7010244) Prepare the engine for starting. See“STARTING ENGINE” for procedures.Be sure the engine is in Neutral andthat the lock plate is attached to theengine stop lanyard switch. The mainswitch must be “ON” if equipped it.5) Pull out the choke knob when a coldengine starts. After the engine start,return the choke knob.