2-7EEMU00108STEERING FRICTION ADJUSTINGSCREW (for Tiller control model)A friction device provides resistance tosteering movement. This is adjustable foroperator preference. An adjusting screw/boltis located on the swivel bracket.EMU01296AdjustmentWARNING@Do not over tighten the friction screw/bolt. If there is too much resistance, itmay be difficult to steer, which couldresult in an accident.@Resistance Screw/BoltIncreased Turn clockwiseDecreased Turn counterclockwiseEMU01297TRIM ANGLE ADJUSTING RODThe position of the trim angle adjusting roddetermines the minimum trim angle of theoutboard motor in relation to the transom.EMU00157TILT SUPPORT LEVERTo keep the outboard motor in the tilted-upposition, lock the tilt support lever to theclamp bracket.
