4-15ENOTE:@If a torque wrench is not available when youare installing the drain plug, finger tightenthe bolt just until the gasket comes into con-tact with the surface of the drain hole. Thentighten 1/4 - 1/2 turn. Have the drain plugtorqued to the correct value with a torquewrench as soon as possible.@4) Remove the oil filler cap 2. Add the cor-rect amount of oil through the filler hole.Reinstall the filler cap.5) Start the engine and make sure thatthere are no oil leaks.6) Turn off the engine and wait 3 minutes.Recheck the oil level in the oil level win-dow to be sure the level falls betweenthe upper and lower marks. Fill with oil ifit is below the lower mark, or drain to thespecified level if it is above the uppermark.NOTE:@ For disposal of used oil consult yourYamaha dealer. The oil should be changed more oftenwhen the engine is operated underadverse conditions such as extendedtrolling.@Engine oil grade/capacity:Refer to “SPECIFICATIONS”, page 4-1.
