2-11EEMU01109Trim MeterThis meter shows the trim angle of your out-board motor.NOTE:@ Memorize the trim angles that work bestfor your boat under different conditions.Adjust the trim angle to the desired set-ting by operating the power trim and tiltswitch. If the trim angle of your motor exceedsthe trim operating range, the top segmenton the trim meter display will start to blink.@EMU01620Hour MeterThis meter shows the number of hours theengine has been run. It can be set to showthe total number of hours or the number ofhours for the current trip. The display canalso be turned on and off. Changing the display formatPressing the MODE button changes thedisplay format in the following circular pat-tern:Total hours - Trip hours - Display off Resetting the trip hoursSimultaneously pressing the SET andMODE buttons for more than 1 secondwhile the trip hours are displayed resetsthe trip counter to 0 (zero).NOTE:@The total number of hours the engine hasbeen run cannot be reset.@
