4-22EEMU01662*REPLACING FUSEIf the fuse has blown on an Electric startmodel, open the fuse box and replace thefuse with a spare one of proper amperage,using a fuse puller.WARNING@Be sure to use the specified fuse. Anincorrect fuse or a piece of wire mayallow excessive current flow. This couldcause electrical system damage and afire hazard.@CAUTION:@ If a main fuse has blown, be sure toalso check the other main fuse. If the outboard motor is operated aftera main fuse has blown charging capa-bility will be insufficient, and theengine will not start.NOTE:@If the new fuse blows again immediately,consult a Yamaha dealer.@1 Fuse box2 Fuse (5 A × 1, 20 A × 2, 30 A × 3)3 Spare fuse (5 A, 20 A, 30 A)4 Fuse puller5 Starter relay6 Main fuse 27 Main fuse 18 Fuel feed pump9 Main switch / Trim switch0 Engine control unit / Ignition coil / Fuel injec-tion pump / Fuel injection nozzle / ISC (idlespeed control)
