4-20E3) Remove the oil filler cap 1. Add the cor-rect amount of oil through the filler hole,and reinstall the filler cap.CAUTION:@ Do not overfill the oil, and be sure theengine is in an upright position (nottilted) when checking and changingthe oil. If the oil level is above the upper levelmark, drain until the level meets thespecified capacity. Over filling the oilmay cause leakage or damage.@4) Start the engine and watch to make surethe low oil pressure warning indicator turnsoff. Make sure that there are no oil leaks.CAUTION:@If the low oil pressure warning indicatordoes not turn off, or if there are oil leaks,stop the engine and find the cause.Continued operation with a problemcould cause severe engine damage. Ifthe problem cannot be found and cor-rected, consult your Yamaha dealer.@5) Turn off the engine and wait 3 minutes.Recheck the oil level using the dipstickto be sure the level falls between theupper and lower marks. Fill with oil if it isbelow the specified level if it is above theupper mark.6) Dispose of used oil according to localregulations.NOTE:@ For disposal of used oil consult yourYamaha dealer. The oil should be changed more oftenwhen the engine is operated underadverse conditions such as extendedtrolling.@Engine oil grade/capacity:Refer to “SPECIFICATIONS”, page 4-1.