5 - 6ENGENGINEEAS00192INSTALLING THE ENGINE1. Install:• spacer 1• spacer bolt 2• rear lower mounting bolt 3• rear upper mounting bolt 4• front mounting bolts 5, 6• engine bracket 2 7• engine bracket 1 8NOTE:@Do not fully tighten the bolts.2. Tighten the bolts in the following order.• front mounting bolts (left) 5• rear lower mounting bolt 3• spacer bolt 2• nut 9• front mounting bolts (left) 5• front mounting bolts (right) 6• pinch bolts 0• pinch bolt ANOTE:• Tighten the spacer bolt 2 to specificationwith a frame spanner socket B.• When tightened, the spacer bolt 2 should beflat against the engine surface.Frame spanner socketYM-01471T R..55 Nm (5.5 m · kg, 40 ft · lb)T R..45 Nm (4.5 m · kg, 32 ft · lb)T R..18 Nm (1.8 m · kg, 13 ft · lb)T R..45 Nm (4.5 m · kg, 32 ft · lb)T R..55 Nm (5.5 m · kg, 40 ft · lb)T R. .55 Nm (5.5 m · kg, 40 ft · lb)T R. .24 Nm (2.4 m · kg, 17 ft · lb)T R. .24 Nm (2.4 m · kg, 17 ft · lb)3. Temporarily tighten the bolts (enginebracket 2 and engine) 1 and bolts (enginebracket 2 and frame) 2.NOTE:When temporarily tightened, the bolts 1, 2should be flat against the engine and framesurface.
