8 - 54– +ELECFUEL INJECTION SYSTEMYES NOYES NOYES NOCrankshaft position sensor resis-tance420 ~ 569 Ω at 20 °C (68 °F)(between gray and black)• Is the crankshaft position sensor OK?Replace the crank-shaft position sensor.8. Cylinder identification sensor output volt-age• Connect the pocket tester (DC 20 V) to thecylinder identification sensor coupler termi-nal as shown.Tester positive probe → white 1Tester negative probe → black/blue 2• Set the main switch to “ON”.• Measure the cylinder identification sensoroutput voltage.Cylinder identification sensoroutput voltageWhen sensor is onDC 4.8 V or moreWhen sensor is offDC 0.6 V or less• Is the cylinder identification sensor OK?Replace the cylinderidentification sensor.W L/YB/LL W/BB/L9. Speed sensor output voltage• Measure the speed sensor output voltage.• Connect the pocket tester (DC 20 V) to thespeed sensor coupler terminal as shown.Tester positive probe → white 1Tester negative probe → black/blue 2• Measure the speed sensor output voltage.Speed sensor output voltageWhen sensor is onDC 4.8 V or moreWhen sensor is offDC 0.6 V or less• Is the speed sensor OK?Replace the speedsensor.W L/YB/LL W/YB/L12
