Yamaha MT-03 Service Manual

Also see for MT-03: Owner's manual Owner's manual Owner's manual

3-31ELECTRICAL SYSTEMCAUTION:Do not overtighten the screw, otherwise thelens may break.▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼REPLACING THE LICENSE PLATELIGHT BULB1. Replace:• License plate light bulb▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼a. Remove:• Reinforcement plate bolts and nuts• Reinforcement plate “1”• License plate light bulb socket “2” (by pullingit out)• License plate light bulb “3” (by pulling it out)NOTE:When removing the license plate light bulbsocket, be careful not to pull too hard.b. Install:• License plate light bulb into the socket (bypushing it in)• License plate light bulb socket (by pushingit in)• Reinforcement plate• Reinforcement plate bolts and nutsc. Tighten:• Reinforcement plate bolts and nutsNew132Reinforcement plate nut7 Nm (0.7 m·kg, 5.1 ft·lb)Reinforcement plate bolt (centre)10 Nm (1.0 m·kg, 7.2 ft·lb)Reinforcement plate bolt (upper)10 Nm (1.0 m·kg, 7.2 ft·lb)▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼EAA01170ADJUSTING THE HEADLIGHT BEAM1. Adjust:• Headlight beam (vertically)▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼a. Turn the adjusting screw “1” in direction “a”or “b”Direction (a)Headlight beam is loweredDirection (b)Headlight beam is raised1b a▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼