Yamaha PDM-4220 User Manual

Also see for PDM-4220: User manual Service manual

12Anti-tumble measuresHave this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible physical injury.Securing to a wall or pillarUse a commercially available cord, chain and clamp, secure the set to a firm wall or pillar.Securing desktop1) Using wood screws (two), fasten the set to the clamping screw holes on the rear of thestand as shown.2) Using commercially available wood screws, secure the set firmly in position.INSTALLATION INSTRUCTIONSInstallation• In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches :For a desktop set-up) or more between the sides and other objects such as walls, etc.,so that the ventilation holes are not blocked.(*)10cm (4 inches) or more*CordorchainClampHookChaincord or chainclampWall or PillarTwo placesWood screwUse one of the special mount units to install this product. A mount of insufficient strength or inadequate design can cause overturning ordropping and result in fire, electrical shock or injury. Please note that our company assumes absolutely no responsibility for personalinjuries or property damage caused by use of other mount units or improper installation.WARNINGCAUTIONCAUTIONRead CAUTION ( to ) carefully to ensure maximum safety before proceeding to thesesteps:• Choose an appropriate site and install the product on a level table where the stand is secure.• Install the monitor to have ready access to a power socket available.• Make sure that the power switch of this device is turned off.73