Yamaha PDM-4220 User Manual

Also see for PDM-4220: User manual Service manual

34OPERATING INSTRUCTIONS (continued)PICTURE MENU (TV/Video mode) (continued)Dynamic Natural CinemaCool Normal Warm Black / WhiteNormal Auto DynamicOff Low HighOff OnOff OnOff Low Middle HighOff OnOff OnSetup hintDynamic: This setting is best for very bright ambient lighting.Natural: This setting is for normal lighting conditions.Cinema: This setting is best for watching movie.Adjust for maximum visibility to suit the ambient brightness.This can adjust further till [+40] by pressing and holdingSELECT button at [+31]. The colour for [+32] to [+40] numberswill change from green to magenta. This special mode is betterfor dark scenes.For normal viewing we recommend that the Contrast is set to [+31].“Panel Life” in the Function Menu should be set to Normal whenthis Contrast setting is adjusted.Adjust to preference.Adjust to preference.Shift to the minus (-) side for a softer effect and plus (+) forsharper picture.This is not available to adjust when receiving PAL/SECAMsignal.Then the character will be greyed out.Adjust for most realistic skin colour.Normally set to Cool.Dynamic: Emphasizes the differences between video shadingsto improve the feeling of contrast.Normal: The gradation of an image is reproduced as faithfullyas possible.Auto: Detects image brightness and automatically adjustsfor natural brightness.The original factory settings for the items of this Menu page canbe restored by pressing the OK button.Performs picture signal noise reduction. Turn up to reducenoise.Performs colour signal noise reduction. Turn up to reduce noise.And it will be fixed as Off only when selecting DVI-STB mode.On: Automatically detects the movie film material and faithfullyreproduces the original film image.Off: Set to OFF when switching between images does notappear natural.This is available only when receiving a PAL composite signal.Turn On to reduce the discolorations in fine picture detail andprovides purer colour.Adjusts the sharpness of the picture signal.Adjusts the sharpness of the colour signal.Adjusts the black level compensation.This is available only when receiving an NTSC composite/S.Video signal. This monitors and adjusts the colour to maintainconstant colour levels. It also maintains natural flesh tones whilstpreserving fidelity of background colours.Turn On when you wish to change colour temperaturedepending on the user's preference.Adjust colour temperature depending on the user’s preference.These settings are independently stored in each of the 4 ColourTemperature modes.Selected charactersPicture ModeContrastBrightnessColourSharpnessHueColour TemperatureContrast ModeResetYNRCNRFilm ModePAL Comb FilterLTICTIBlack EnhancementAuto ColourColour Temp. AdjustmentAmplitudeCut OffNarrows the gap betweenbrightness and darkness.Black is subdued forincreased overall darkness.Decrease colour intensity.SoftEnhances red and weakensgreen.(off the function)Brightness scene isdecreased in reddish colour.Brightness scene isdecreased in greenish colour.Brightness scene isdecreased in bluish colour.Dark scene is decreased inreddish colour.Dark scene is decreased ingreenish colour.Dark scene is decreased inbluish colour.Broadedns the gap betweenbrightness and darkness.Black is set off for increasedoverall brightness.Increase colour intensity.SharpEnhances green and weakensred.(waiting to reset)Brighter scene is increased inreddish colour.Brighter scene is increased ingreenish colour.Brighter scene is increased inbluish colour.Dark scene is increased inreddish colour.Dark scene is increased ingreenish colour.Dark scene is increased inbluish colour.▲▲RedGreenBlueRedGreenBlue