Yamaha PW50 2013 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS4-14EAU40661Handlebar switchEAU40675Engine stop switch“OFF/RUN/START”Set this switch to “START” beforestarting the engine. Set this switch to“RUN” after warming up the engine orbefore starting off. Set this switch to“OFF” to stop the engine.TIP The engine cannot be started withthis switch set to the “RUN” posi-tion. The engine speed is limited whilethis switch is set to the “START”position, therefore the motorcyclecannot be ridden in that switchposition.EAU41045Speed limiter and power re-duction plateYour motorcycle is equipped with anadjustable speed limiter and a powerreduction plate. The speed limiterkeeps the throttle from fully opening,even when the throttle grip is turned tothe maximum. The power reductionplate is installed in the exhaust mani-fold to limit the amount of power avail-able while learning.Speed limiter1. Loosen the locknut.2. To increase the maximum enginepower available and the maximumspeed of the motorcycle, turn theadjusting screw in direction (a). Todecrease the maximum enginepower available and the maximumspeed of the motorcycle, turn theadjusting screw in direction (b).1. Engine stop switch “OFF/RUN/START”1