Yamaha PW50 2013 Owner's Manual
                                                                            |
PERIODIC MAINTENANCE AND ADJUSTMENT7-2073. Insert the wheel axle from the rightside.4. Install the washer and axle nut,and then tighten the axle nut to thespecified torque.5. Connect the brake cable at thewheel hub, and then install thebrake lever free play adjusting nut.6. Adjust the brake lever free play.(See page 7-14.)7. Take the motorcycle off the cen-terstand so that the front wheel ison the ground.8. Push down hard on the handlebarseveral times to check for properfork operation.EAU25081Rear wheelEAU56820To remove the rear wheelWARNINGEWA10822To avoid injury, securely support thevehicle so there is no danger of itfalling over.1. Place the motorcycle on the cen-terstand.2. Remove the seat. (See page 4-7.)3. Remove the muffler bolt andwashers. WARNING! Always letthe exhaust system cool prior totouching exhaust components.[EWA14582]4. Slide the spring clamp down, andthen remove the muffler.1. RetainerTightening torque:Axle nut:40 Nm (4.0 m·kgf, 29 ft·lbf)1 |
Related manuals for Yamaha PW50 2013
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine