INSTRUMENT AND CONTROL FUNCTIONS4-243. Tighten the locknut.TIPThe adjusting range of the speed limit-er screw is from the fully turned-in po-sition to 7 mm (0.28 in) turned out.When the screw is turned out to 7 mm(0.28 in), the throttle grip can only beopened approximately halfway. If morepower is required, please consult aYamaha dealer.WARNINGEWA14632Improper adjustment of the speedlimiter could cause improper throttleoperation. You could lose control,have an accident or be injured. Donot turn the adjusting screw outmore than 7 mm (0.28 in) before con-sulting a Yamaha dealer. Alwaysmake sure the throttle grip free playis adjusted to 1.5–3.5 mm (0.06–0.14in). (See page 7-12.)Power reduction plateOnce the rider can operate with skill atthe top speed permitted by adjustingthe speed limiter alone, the power re-duction plate can be removed. (Seepage 7-7.)EAU12902Front brake leverThe front brake lever is located on theright side of the handlebar. To applythe front brake, pull this lever towardthe throttle grip.1. Locknut2. Adjusting screw1. No more than 7 mm (0.28 in)1(a)(b)211. Front brake lever1