Yamaha R-N301 Owner's Manual

Also see for R-N301: Owner's manual Owner's manual Owner's manual

Contents

18 EnAt the factory, the frequency step setting is set to 50 kHzfor FM and 9 kHz for AM. Depending on your country orregion, set the frequency steps to 100 kHz for FM and 10kHz for AM.1 Turn off the unit.2 When holding down RETURN on the frontpanel, press A (power).3 Rotate SELECT/ENTER to select “TUNER”.4 Press SELECT/ENTER to select“FM100/AM10”.5 Press A (power) to set the unit to turn off andturn it on again.1 Press TUNER to select “TUNER” as the inputsource.2 Press FM or AM to select the reception band(FM or AM).3 Press and hold TUNING jj / ii for more than1 second to begin tuning.Press ii to tune in to a higher frequency.Press jj to tune in to a lower frequency.The frequency of the received station is shown in thefront display.If a broadcast is being received, “TUNED” indicatoron the front display will be lit. If a stereo broadcast isbeing received, the “STEREO” indicator will also lit.If the tuning search does not stop at the desiredstation because the station signals are weak, use thefollowing keys to set a frequency.yWhen the signal reception for an FM radio station is unstable,switching to monaural may improve it.Listening to FM/AM radioSetting the frequency stepsSTANDBY/ONVOLUMERETURNPUSH - ENTERTUNINGPRESETFM/AMMEMORYBASS TREBLE INPUTFM MODEDISPLAYSELECTPHONES SPEAKERSA BA (power)SELECT/ENTERRETURNTUNER•••FM50/AM9FM/AM tuningTUNING jj / iiMODEFMAMTUNERPOP-UP MENUAMFMMODELINE 1COAXIAL OPTICAL NETLINE 2 LINE 3TUNER CDPRESETTUNINGDIMMER SLEEPBASPEAKERSHOME NOW PLAYINGSTEREO SP ATUNED¡¡¡¡FM¡98.50MHzFrequency