Yamaha R-N301 Owner's Manual

Also see for R-N301: Owner's manual Owner's manual Owner's manual

Contents

37 EnEnglishADVANCEDOPERATIONNew firmware that provides additional features or product improvements will be released as needed. When newfirmware is available, “New Firm” is displayed for a while when the unit is turned on. Follow the steps below to updatethe firmware.1 Press SETUP.2 Use the cursor keys to select “NetworkSetup” and press ENTER.3 Use the cursor keys to select “Information”and press ENTER.If new firmware is available, “NewFwAvailable”appears on the front display.4 Press RETURN to return the previous state.5 Use the cursor keys to select “Update” andpress ENTER.6 To start the firmware update, press ENTER.The unit to restart and the firmware update starts.yTo cancel the operation without updating the firmware, pressSETUP.7 If “UPDATE SUCCESS” appears on the frontdisplay, press A (power) on the front panel.The firmware update is complete.Updating the unit’s firmware via the networkDo not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20minutes or more (depending on your Internet connection speed).Please Update!New FirmNoteSETUPPOP-UP MENU HOME NOW PLAYINGMUTEVOLUMERETURNENTERSETUPENTERCursor keysB / CSP A¡NewFwAvailableFirmwareSP A¡Perform¡UpdateNetwork