Yamaha R-N301 Owner's Manual

Also see for R-N301: Owner's manual Owner's manual Owner's manual

Contents

45 EnEnglishADDITIONALINFORMATIONAUDIO SECTION• Minimum RMS Output Power(40 Hz to 20 kHz, 0.2% THD, 8 )[U.S.A, Canada, General, Korea, Australia, U.K, Europe models]............................................................................100 W + 100 W[Asia model] .............................................................85 W + 85 W• Dynamic power per channel (IHF) (8/6/4/2 )............................................................................125/150/165/180 W• Maximum power per channel [Europe model only](1 kHz, 0.7% THD, 4 ) ..................................................... 115 W• IEC power [Europe model only](1 kHz, 0.2% THD, 8 ) ...................................................... 110 W• Damping factor (SPEAKERS A)1 kHz, 8 .................................................................... 120 or more• Maximum effective output power (JEITA)(1 kHz, 10% THD, 8 )[General model] ...................................................... 140 W or more[Asia model] ........................................................... 125 W or more• Input sensitivity/Input impedanceCD, etc. .................................................................. 500 mV/47 k• Maximum input signalCD, etc. (1 kHz, 0.5% THD) .................................... 2.2 V or more• Output level/Output impedanceCD, etc. (Input 1 kHz, 500 mV)REC OUT ........................................................... 500 mV/2.2 kPHONES (8  load) ............................................ 470 mV/470 • Frequency responseCD, etc. (20 Hz to 20 kHz) ............................................0 ± 0.5 dBCD, etc. (10 Hz to 100 kHz) ................................... 0 +0.5/-3.0 dB• Total harmonic distortionCD, etc. to SPEAKERS(20 Hz to 20 kHz, 50.0 W, 8 ) ............................... 0.2% or less• Signal to Noise Ratio (IHF-A Network)CD, etc. (input shorted, 500 mV) .......................... 100 dB or more• Residual noise (IHF-A network) ............................................ 70 μV• Channel separationCD, etc. (5.1 k input shorted, 1/10 kHz).......... 65/50 dB or more• Tone control characteristicsBASSBoost/Cut (50 Hz) ...........................................................± 10 dBTREBLEBoost/Cut (20 kHz) .........................................................± 10 dB• Digital inputOPTICALCOAXIALSupport audio sample rate .......... 32/44.1/48/88.2/96/176.4/192 kHzFM SECTION• Tuning range[U.S.A. and Canada models] ............................87.5 to 107.9 MHz[Asia and General models] .........87.5/87.50 to 108.0/108.00 MHz[U.K., Europe, Korea, Australia models] .....87.50 to 108.00 MHz• 50 dB quieting sensitivity (IHF, 1 kHz, 100% MOD.)Mono ................................................................. 3.0 μV (20.8 dBf)• Signal to noise ratio (IHF)Mono/Stereo ...............................................................72 dB/70 dB• Harmonic distortion (1 kHz)Mono/Stereo ................................................................. 0.3%/0.5%Antenna input .......................................................75  unbalancedAM SECTION• Tuning range[U.S.A. and Canada models] ............................... 530 to 1710 kHz[Asia and General models] .................. 530/531 to 1710/1611 kHz[U.K, Europe, Korea, Australia models]...............531 to 1611 kHzGENERAL• Power supply[U.S.A. and Canada models] ...............................AC 120 V, 60 Hz[General model] .......................AC 110-120/220-240 V, 50/60 Hz[Korea model] .......................................................AC 220 V, 60Hz[Australia model] ................................................AC 240 V, 50 Hz[U.K. and Europe models] ..................................AC 230 V, 50 Hz[Asia model] .......................................... AC 220-240 V, 50/60 Hz• Power consumption[U.S.A, Canada, General, Korea, Australia, U.K. and Europe models]........................................................................................... 200 W[Asia model] ........................................................................ 165 W• Standby power consumption .................................................. 0.1 WNetwork standby on ................................................................. 2.0 W• Dimensions (W  H  D) .................................435  141  333 mm(17-1/8”  5-1/2”  13-1/8”)• Weight ....................................................................6.95 kg (15.3 lbs)* Specifications are subject to change without notice.Specifications