Yamaha R-N301 Owner's Manual

Also see for R-N301: Owner's manual Owner's manual Owner's manual

Contents

36 EnConfigure the system settings of the unit while viewing the front display.1 Turn off the unit.2 While holding down RETURN on the frontpanel, press A (power).3 Rotate SELECT/ENTER to select an item.4 Press SELECT/ENTER to select a setting.5 Press A (power) to set the unit to turn off andturn it on again.The new settings take effect.Change the FM/AM tuning frequency setting of the unitdepending on your country or region.SettingsRestores the default settings for the unit.ChoicesNew firmware that provides additional features or productimprovements will be released as needed. If the unit isconnected to the Internet, you can download the firmwarevia the network. For details, refer to the informationsupplied with updates.■ Firmware update procedureDo not perform this procedure unless firmware update isnecessary. Also, make sure you read the informationsupplied with updates before updating the firmware.1 When the “NETWORK” displayed on the frontdisplay, press RETURN to start firmwareupdate.yIf the unit detects newer firmware over the network,“NewFwAvailable” appears as the “Information” menu item in“Network Setup”. In this case, you can also update the unit’sfirmware by following the procedure in “Updating the unit’sfirmware via the network” (p.37).Check the version of firmware currently installed on the unit.y• You can also check the firmware version in “Update” (p.35) inthe “Setup” menu.• It may take a while until the firmware version is displayed.Configuring the system settings (ADVANCED SETUP menu)ADVANCED SETUP menu itemsItem Function PageTUNER Changes the FM/AM tuning frequencysetting. 36INIT Restores the default settings. 36UPDATE Updates the firmware. 36VERSION Checks the version of firmwarecurrently installed on the unit. 36Changing the FM/AM tuningfrequency setting (TUNER)FM100/AM10Select this when you want to adjust the FM frequencyby 100-kHz steps and AM by 10-kHz steps.FM50/AM9(default)Select this when you want to adjust the FMfrequency by 50-kHz steps and AM by 9-kHz steps.STANDBY/ONVOLUMERETURNPUSH - ENTERTUNINGPRESETFM/AMMEMORYBASS TREBLE INPUTFM MODEDISPLAYSELECTPHONES SPEAKERSA BA (power)SELECT/ENTERRETURNTUNER•••FM50/AM9Restoring the default settings (INIT)ALL Restores the default settings for the unit.CANCEL Does not perform an initialization.Updating the firmware (UPDATE)Checking the firmware version(VERSION)INIT••••••CANCELUPDATE•••NETWORKVERSION••••xx.xx