Yamaha R-N602 Owner's Manual

Also see for R-N602: Owner's manual Owner's manual Owner's manual Firmware update procedure Service manual

Contents

19 EnConnecting to networkPREPARATION EnglishUsing Wireless Direct, this unit can operate as a wirelessnetwork access point that mobile devices can directlyconnect to.When the unit is connected to the network with Wireless Direct, itcannot connect to any other wireless router (access point). Toplay back contents from the Internet, connect this unit to anetwork with a wired router or wireless router (access point).1 Press A to turn on this unit.2 Press SETUP.3 Use the cursor keys (B / C) to select“Network” and press ENTER.yTo return to the previous state, press RETURN.4 Use the cursor keys (B / C) to select“Connection” and press ENTER.5 Use the cursor keys (B / C) to select“WirelesDirect” and press ENTER.6 Press ENTER to check the SSID on this unit,and press RETURN to previous state.7 Use the cursor keys (B / C) to select“Security” and press ENTER.8 Use the cursor keys (D / E) to select desiredsecurity method and press RETURN.SettingsNone, WPA2-PSK (AES)If you select “None”, the connection may be insecure since thecommunication is not encrypted.9 Use the cursor keys (B / C) to select“Security Key” and press ENTER.10 Use the cursor keys to enter the security keyon this unit, and press RETURN to previousstate.Use the cursor keys (D / E) to move the edit positionand the cursor keys (B / C) to select a character.You can insert / delete a character, by pressingPRESET i (insert) or PRESET j (delete).11 Use the cursor keys (B / C) to select“Connect[Enter]” and press ENTER to savethe setting.The SSID and security key information is requiredfor setup of a mobile device.When you select the “SSID” in step 6, you can checkthe configured SSID on this unit. The SSID of thisunit can be change by using cursor keys (B / C / D /E).12 Configure the Wi-Fi settings of a mobiledevice.For details on settings of your mobile device, refer tothe instruction manual of the mobile device.(1) Enable the Wi-Fi function on the mobile device.(2) Select the SSID of this unit from the list ofavailable access points.(3) When you are prompted for a password, enter thesecurity key displayed in Step 10.If “ERROR” appears, check the security key on thisunit and repeat Step 12.If “ERROR” not appears, a connection is success.Verify whether the unit is connected to a wirelessnetwork (p. 20).13 To exit from the menu, press SETUP.Connecting a mobile device to theunit directly (Wireless Direct)NotePRESETMEMORYSETUPHOMEMUTENOW PLAYINGVOLUMERETURNENTEROPTIONRETURNSETUPENTERCursor keysB / C / D / ESSIDW DIRECTWPA2-PSK(AES)W DIRECTNoteKEY