Yamaha R-N602 Owner's Manual
Also see for R-N602: Owner's manualOwner's manualOwner's manualFirmware update procedureService manual
                                                                                                                                  | |
Contents
|
47 EnEnglishADVANCEDOPERATIONConfigure the system settings of the unit while viewing the front display.1 Turn off the unit.2 While holding down RETURN on the frontpanel, press A (power).3 Rotate SELECT/ENTER to select an item.4 Press SELECT/ENTER to select a setting.5 Press A (power) to set the unit to turn off andturn it on again.The new settings take effect.Change the unit’s speaker impedance settings dependingon the impedance of the speakers connected.SettingsWhen using multiple receivers in the same room, settingthe remote control ID of this unit to ID1 (and setting theanother receiver to other than ID1 can prevent interferencefrom other remote controls.SettingsID1, AUTO (default)Restores the default settings for the unit.ChoicesConfiguring the system settings (ADVANCED SETUP menu)ADVANCED SETUP menu itemsItem Function PageSP IMP. Changes the speaker impedancesetting. 47REMOTE ID Selects the unit’s remote control ID. 47INIT Restores the default settings. 47UPDATE Updates the firmware. 48VERSION Checks the version of firmwarecurrently installed on the unit. 48VOLUMEPURE DIRECTRETURNCONNECTPUSH - ENTERTUNINGPRESETBANDMEMORY CLEARBASSINPUT5V 1ABALANCEL RTREBLE LOUDNESSFLAT-30dBDIMMER MODEDISPLAYSELECTPHONES SPEAKERSA BA (power)SELECT/ENTERRETURNDISPLAYChanging the speaker impedancesetting (SP IMP.)4 MINSelect this option when you connect speakers withan impedance of 4 ohms to less than 8 ohms to theunit.8 MIN(Default)Select this option when you connect speakers withan impedance of 8 ohms or more to the unit.Selecting the remote control ID(REMOTE ID)Restoring the default settings (INIT)ALL Restores the default settings for the unit.NETWORKInitialize all of the network, Bluetooth and USBsettings. When performing the initialization, thepreset (p. 41) registered by NET/USB input willbe cleared.CANCEL Does not perform an initialization.SP IMP.••8¬MINREMOTE ID•AUTOINIT••••CANCEL |
Related manuals for Yamaha R-N602
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine