37EnglishADVANCEDOPERATIONAdjusting the items on the setmenuUse the remote control to make adjustments.y• You can change set menu parameters while the unit isreproducing sound.• You can use NEXT and SET MENU +/– on the front panel tochange these settings, if the unit is not set to TUNER mode.Press NEXT to select the category or field you wish to change,and SET MENU +/– to change the parameters.Note• You cannot change some set menu parameters while the unit isin night listening mode.1 Press AMP.2 Press SET MENU to enterthe set menu.3 Press u / d repeatedly to select the desiredmenu.4 Press j / i to enter the selected menu.5 Press u / d repeatedly to select the itemyou want to adjust.y• By pressing SET MENU repeatedly, you can select items inthe same order as when pressing d.AMPSET MENUYou can set the following parameters on the set menu toobtain a better sound from the unit. Change the settings toreflect the needs of your listening environment.Set menu listThe set menus are divided by use and function into the 4categories listed here. BASICThe BASIC area contains the basic parameters that youmust set before using this unit. It consists of the followingmenus. See pages 18 – 20 for a detailed explanation.1 SETUP2 SP LEVEL (Speaker level) SOUNDThe SOUND area contains parameters for altering soundoutput. It consists of the following menus that you canuse to alter the quality and tone of the sound output by thesystem.1 SPEAKER SET2 SP DISTANCE (Speaker distance)3 LFE LEVEL (Low frequency effect level)4 D. RANGE (Dynamic range)5 CENTER GEQ (Center graphic equalizer)6 HP TONE CTRL (Headphone tone control) INPUTThe INPUT area contains parameters concerned withsignal input. It consists of the following menus that youcan use to change the assignment of input jacks.1 I/O ASSIGN2 INPUT MODE OPTIONThis is a supplementary set up menu provided for yourconvenience. It consists of the following menus that youcan use to change display brightness, protect existingsettings, and perform other non-essential functions.1 DISPLAY SET2 MEM. GUARD3 AUDIO MUTE• In the descriptions for each item from the following page, thedefault setting is indicated in bold.SET MENUA/B/C/D/EMENUSELECT +–PRESET/CH+109STEREO6.1/5.1NIGHT/DTS8765MOVIE2MOVIE1TV THTRMUSIC4321ENTERTAINMENTROCKJAZZHALLTVAMPMUTEINPUTMUTEVOLUME+–+–+–CHVOLSET MENUSELECTPRESET/CHA/B/C/D/ELEVELMENUTESTRETURN DISPLAYTITLE+–0 ENTER23,5,84,6,718