Yamaha RX-V340 Owner's Manual

Also see for RX-V340: Service manual Owner's manual

Contents

3EnglishINTRODUCTIONInstalling batteries in the remotecontrolInsert the batteries in the correct direction by aligning the+ and – marks on the batteries with the polarity markings(+ and –) inside the battery compartment.1 Press the part marked with a and slide offthe battery compartment cover.2 Insert the two batteries supplied (AA, R06,UM-3) according to the polarity markings onthe inside of the battery compartment.3 Slide the cover back on so that it snaps intoplace. Notes on batteries• Change all of the batteries if you notice a decrease inthe operating range of the remote control.• Do not use old batteries together with new ones.• Do not use different types of batteries (such as alkalineand manganese batteries) together. Read the packagingcarefully as these different types of batteries may havethe same shape and color.• If the batteries have leaked, dispose of themimmediately. Avoid touching the leaked material orletting it come into contact with clothing, etc. Clean thebattery compartment thoroughly before installing newbatteries.If the remote control is without batteries for more than2 minutes, or if exhausted batteries remain in theremote control, the contents of the memory may becleared. When the memory is cleared, insert newbatteries, set up the manufacturer code and programany acquired functions that may have been cleared.AM loop antenna (Europe, U.K., Australia andSingapore models)Indoor FM antenna(U.S.A., Canada, China,Korea and General models)Batteries (2)(AA, R06, UM-3)Remote controlGETTING STARTEDSupplied accessoriesAfter unpacking, check that the following parts are contained.SYSTEMPOWERSTANDBYPOWERAVPOWERTVPOWERTVENTER+1009STEREO6.1/5.1NIGHT/DTS8765MOVIE2MOVIE1TV THTRMUSIC4321ENTERTAINMENTROCKJAZZHALLV-AUXVCRD-TV/CBLDVDSLEEPTUNERMD/CD-RCDTVAMPCODE SETMUTEINPUTMUTEREC 6CH INPUTAUDIODISC SKIPVOLUME+–+–+–CHVOLSET MENUSELECTPRESET/CHA/B/C/D/ELEVELMENUTESTRETURN DISPLAYTITLE+–132