Yamaha SRT-1500 Owner's Manual

Also see for YSP-1600: Quick reference guide Quick reference guide Quick reference guide Quick reference guide Service manual

Contents

PREPARATIONS ➤ f Initial settings En 18Selecting the language for menu display1 Turn the unit and TV on.2 Switch the TV’s input to display video input from this unit (p. 17).3 Press and hold the SETUP key until the “OSD Language” menuappears on the TV.When the menu is not displayed• Confirm the following cases.– The HDMI input jack of your TV and the HDMI OUT (ARC) jack of the unit are connected.– The input of your TV is set to “HDMI 1” (example).4 Use the S/T key to select the desired language and press theENTER key.Settings, ENGLISH (default), DEUTSCH, FRANÇAIS, ESPAÑOL, ITALIANO, NEDERLANDS,РУССКИЙ, SVENSKA, TÜRK5 Press the SETUP key to exit the setup menu.Setting a surround sound effect for the installationpositionThe surround sound is achieved by reflecting the sound beams off walls as shown inthe illustration below. For optimum surround effect, turn on the unit and select thePOSITION key according to the installation position of the unit.1 Hold down the POSITION key that corresponds to the installationposition of the unit for more than 3 seconds.The indicators on the front panel flash according to the set position.OSD LanguageENGLISHDEUTSCHFRANÇAISESPAÑOLITALIANONEDERLANDSР У С С К И ЙSVENSKATÜRKLeftCenterRightL (Left)R (Right)C (Center)(default setting)Left side of roomCenter of roomRight side of room1 2 3 4 5 6