NETWORKS ➤ Playing back music with AirPlay En 44The AirPlay function allows you to play back iTunes or iPod music on the unit vianetwork.• This section describes “iPod touch”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod touch”,“iPhone” and “iPad”, unless otherwise specified.• To use this function, the unit and your PC or iPod must be connected to the same router (p. 30). You cancheck whether the network parameters (such as the IP address) are properly assigned to the unit in“Information” (p. 53) in the setup menu.• When using a multiple SSID router, access to the unit might be restricted depending on the SSID toconnect. Connect the unit and iPod to the same SSID.• The AirPlay function can be used with an iPhone, iPad, or iPod touch running iOS 4.3.3 or later, a Macrunning OS X version 10.8 “Mountain Lion” or later, or a Mac or Windows computer with iTunes 10.2.2 orlater installed.Playback of iTunes/iPod music contentsFollow the procedure below to play back iTunes/iPod music contents on the unit.1 Turn on the unit, and start iTunes on the PC or display the playbackscreen on the iPod.If the iTunes/iPod recognizes the unit, the AirPlay icon ( ) appears.• If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly.2 On the iTunes/iPod, click (tap) the AirPlay icon and select the unit(network name of the unit) as the audio output device.Playing back music with AirPlayThe unitiTunesiPodRouter(wired orwireless)(wired orwireless)iTunes (example) iPod iOS7/iOS8 (example) iPod iOS6 (example)SRT-1500 XXXX SRT-1500 XXXXiTunes (example) iPod (example)Network name of the unit