Yamaha SRT-1500 Owner's Manual

Also see for YSP-1600: Quick reference guide Quick reference guide Quick reference guide Quick reference guide Service manual

Contents

PLAYBACK ➤ Enjoying sound based on your preference En 23Adjusting volume for each channelAdjust the volume of playback for each channel (audio in eachdirection) so that sounds are evenly distributed in their respectivedirections.• Refer to “Channel Level” (p. 49) when adjusting the volume of each channel withthe test sound.1 Hold down the CH LEVEL key for more than 3seconds.2 Press the CH LEVEL key to select adjustablechannel from the followings.The output channel changes as follows each time the CHLEVEL key is pressed.• Subwoofer volume can only be adjusted in stereo playback mode (p. 22).3 Press the S/T key to adjust the volume.Example of volume balance• If you have problems hearing words: Select C (center) to increase the level.When the sound is not like surround sound: Select SL (surround left) and SR(surround right) to increase the level.• The volume of the subwoofer also can be adjusted by using the SUBWOOFER (+/–) key.• When the position setting is changed (p. 18), the channel level setting will beoverwritten.Viewing audio informationInformation regarding audio currently playing can be viewed.1 Press the INFO key.The following information regarding audio currently playingis displayed via indicators on the front panel while the INFOkey is held down.a Audio from a TV that supports ARC is currently beinginput to the unit via the HDMI cableb Input signal: DTSc Input signal: Dolby Digitald Dolby Pro Logic II is currently in use (2-channel audiosignal is input)e CLEAR VOICE is enabled (p. 24)Indicators on the front panelFront (left)CenterFront (right)Surround (right)Surround (left)SubwooferReturns to Front (left)Volume down (T) Volume up (S)Display while volume is adjustedThe lighted indicator moves to the right when the volume is turned up,and to the left when the volume is turned down.1 2 3 4 5CH LEVELINFOSUBWOOFER(+/ -) /