33Return the settings of the product to the factory settings.1 When the power is on (the powerbutton ( ) lights up green), pressand hold the power button ( ) for 2seconds or more to enter standbymode.The product enters the standby mode, and the powerbutton ( ) lights up red.2 Press the power button ( ) whileholding down the tuning fork button( ) and the volume - button ( ) atthe same time, then release thepower button ( ) only.The lamps on the level indicator will light upmoving horizontally, and the power-on operationstarts. Be sure to hold down the tuning fork button( ) and the volume - button ( ).3 When various settings are reset totheir factory defaults, you will benotified by English voice guidance.When the level indicator is turned off,release the tuning fork button ( )and the volume - button ( ).y• Even if the voice guidance is disabled before returning tofactory settings, the voice guidance will notify the user inEnglish when the settings of the product are returned tofactory settings.• When the settings are returned to the factory settings,Bluetooth pairing information is also erased. Refer to"Setup" (page 11) and the subsequent sections to set theproduct up again.Returning to the factory settings