38Change the setting depending on the device connectedto the USB port.If the firmware version of the product is below 2.03, youcannot change the setting of the USB port.■Setting the data transfer rate of theUSB port1 In the "YVC-1000 Configurator"window, select the "USB" tab.2 Select the data transfer rate.yClicking "ONLINE HELP" allows you to access thesupport site that informs whether to select "HI-SPEED"or "FULL-SPEED" depending on the connected device.3 A message appears to confirmwhether to restart the product. Click"OK".The product restarts. Then, the setting is changed.Changing the setting of the USBportNoteSetting DescriptionHI-SPEED Transfers data in USB 2.0 HighSpeed mode.FULL-SPEED Transfers data in USB 2.0 FullSpeed mode.USB portSelect
