Yamaha YVC-1000 User Manual

Also see for YVC-1000: Test guide User manual Quick start guide Quick start guide Quick start guide

373 Change the volume or tone setting tosuit the type of external microphoneyou are using, or your environment.Change the setting in the drop-down list.SIGNAL LEVEL:Set the output level of the external microphone.GAIN:Adjust the sensitivity of the external microphone.The sensitivity can be set in 3 dB steps between -12dB (minimum) and +12 dB (maximum).EQ:Adjust the tone of the external microphone.Change the setting depending on the device connectedto the audio output terminals.■Adjusting the audio output volumeSound may crack or become faint on the other sidedepending on your environment. In this case, adjust theaudio output volume.1 In the "YVC-1000 Configurator"window, select the "AUDIO OUT" tab.2 Select the volume from the "OUTPUTVOLUME" drop-down list.The volume can be set in 3 dB steps between -12 dB(minimum) and +12 dB (maximum).Setting DescriptionMICROPHONE Sets to the microphone level.LINE Sets to the line level.Setting DescriptionTHRU Does not change the tone.LOW CUT Turns down the low pitchsound.LOW BOOST Turns up the low pitch sound.SelectChanging the setting of the audiooutput terminalsAudio output terminalsSelect