ENGINE3-74. Remove:• Oil drain bolt “1”• Oil filler cap “2”5. Drain:• Transmission oil6. Install:• Aluminum washer• Oil drain bolt7. Fill:• Transmission oil8. Check:• Oil leakage9. Check:• Transmission oil level10.Install:• Oil filler capEAM30216ADJUSTING THE CLUTCH LEVER FREEPLAY1. Check:• Clutch lever free play “a”Out of specification Regulate.2. Adjust:• Clutch lever free playHandlebar sidea. Turn the adjuster “1” until the specifiedclutch lever free play is obtained.TIPIf the clutch lever free play cannot be obtainedon the handlebar side, use the adjuster on theclutch cable side.Clutch cable sidea. Slide the clutch cable cover.b. Loosen the locknut “1”.c. Turn the adjuster “2” until the specifiedclutch lever free play is obtained.d. Tighten the locknut “1”.e. Return the clutch cable cover to its originalposition.Oil drain bolt20 N·m (2.0 kgf·m, 15 lb·ft)TypeMotor oil SAE 10W-40 type SG orhigherQuantity (disassembled)0.70 L (0.74 US qt, 0.62 Imp.qt)Quantity0.66 L (0.70 US qt, 0.58 Imp.qt)NewT R..Clutch lever free play7.0–12.0 mm (0.28–0.47 in)Locknut (clutch cable side)4.3 N·m (0.43 kgf·m, 3.2 lb·ft)aG088887T R..