4 - 22CHASFRONT AND REAR BRAKES a. Connect a clear plastic hose 1 tightly to thebleed screw 2. Put the other end of thehose into an open container.b. Loosen the bleed screw and push the brakecaliper pistons into the brake caliper withyour finger.c. Tighten the bleed screw.d. Install a new brake pad shim 3 onto eachnew brake pad 4. 5. Install:• brake caliperT R..Bleed screw6 Nm (0.6 m · kg, 4.3 ft · lb)T R..27 Nm (2.7 m · kg, 20 ft · lb)6. Check:• brake fluid levelBelow the minimum level mark a → Addthe recommended brake fluid to the properlevel.Refer to “CHECKING THE BRAKE FLUIDLEVEL” in chapter 3.7. Check:• brake pedal operationSoft or spongy feeling → Bleed the brakesystem.Refer to “BLEEDING THE HYDRAULICBRAKE SYSTEM” in chapter 3.
