5 - 48ENGCLUTCH5. Install:• friction plates• clutch platesNOTE:_First, install a friction plate and then alternatebetween a clutch plate and a friction plate.6. Install:• pressure plate 1• clutch spring plate seat 2• clutch spring plate 3• clutch spring plate retainer 4NOTE:Tighten the clutch spring plate retainer bolts instages and in a crisscross pattern.7. Install:• pull leverNOTE:_Install the pull lever with the “ ” mark facingtowards the clutch cover.T R..8 Nm (0.8 m · kg, 5.8 ft · lb)8. Install:• clutch coverNOTE:_• When installing the clutch cover, push thepull lever and check that the punch mark aon the pull lever aligns with the mark b onthe clutch cover. Make sure that the pull rodteeth and pull lever shaft pinion gear areengaged.• Tighten the clutch cover bolts in stages andin a crisscross pattern.T R..12 Nm (1.2 m · kg, 8.7 ft · lb)
