Yealink T41P Setup And User Manual

Also see for T41P Skype: Administrator's guide Administrator's guide Registering and using Manual Manual

Contents

Yealink T41P Setup And User Manual Manual pdf 5 page image

________________________________________________________________Copyright © 2005-2015 MyPhones Ltd 5/231. Introduction1.1. Purpose of this DocumentThis guide is to show you how to install and use your Yealink T41P or T42G phonewhich you will use in conjunction with your portal website (www.telephony-cloud.com), therefore the functionality and features described are an appropriatesubset of those available. Full details of the phone’s capabilities can be found inthe Yealink SIP-T42G or SIP T41P User Guides which can be obtained from theYealink web site. However, always use the facilities and features offered by theportal website in configuring your phone in preference to any local capabilities.1.2. Related DocumentsThe Setup and User Guide provides guidance for the ordinary user on the facilitiesand features of your phone system. It should be used in conjunction with thisguide.The System Administrators Guide provides instruction for the CompanyAdministrator in setting up the system and configuring the features andfunctionality available to each user.For Gold product Administrators there is an additional Gold Subscribers Guide forthe Auto Attendant, Call Recording and Call Queueing Capabilities.These guides can be downloaded from the Support Menu on the portal website oraccessed via the Help menu.1.3. Yealink Phone On-line CustomisationCertain features of the Yealink phone operation can be customised via a webbrowser. These are restricted to setting up the appropriate network connections,changing the ring tones and security password and, if desired creating a localphone directory, although this is discouraged as your portal website is the naturalplace for personal and company phone directories. All other features and settingsrelevant to phone usage are handled by your portal website.To Access the Yealink web user interface press the Menu soft key on your phonefollowed by selecting the Status option and pressing the Enter soft key. This willdisplay your phone details. Note down the IP address and enter that into your webbrowser. This will bring up the Yealink web user interface requesting yourUsername and Password to login. The default for both is ‘User’. These may bechanged via the Security tab.The Network tab allows you to specify what sort of network connection you wishto make IP4 or IP6, DHCP or Static IP.