Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint114To configure call type via the web user interface:1. Click on Setting->Call Features.2. Select the desired value from the pull-down list of Call Type.3. Click Confirm to accept the change.To configure call type via the remote control:1. Select Menu->Call Features ->Call Type.2. Select the desired value from the pull-down list of Call Type.3. Press the Save soft key to accept the change.Do not Disturb allows the endpoint to reject all incoming calls automatically. You canactivate the DND mode for the endpoint when it is idle, and the DND mode will bedeactivated after the endpoint places a call. You can also activate the DND mode forthe endpoint during a call, and the DND mode will be deactivated after the endpointends the call.The DND parameter on the endpoint is described below:Parameter Description Configuration MethodDNDEnables or disables DND modeon the endpoint.Default: DisabledRemote ControlWeb User Interface
