Yealink VC110 Admin Manual

Also see for VC110: Getting started Recovery guide Quick start guide Administrator's guide User guide

Contents

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint1347. Click Confirm to accept the change.To configure the time and date format via the remote control:1. Select Menu->Basic->Date & Time.2. Configure the desired values.3. Press the Save soft key to accept the change.The time and date displayed on the LCD screen of the display device and VCP40phone will change accordingly.The endpoint will enter the sleep mode automatically when it has been inactive for aperiod of time (the default time is 10 minutes). When the endpoint is in sleep mode, itcan still accept incoming calls. The display device will prompt ‖No Signal‖, and the LCDscreen of the VCP40 phone prompts ―Sleeping Press any key to resume‖. You can pressany key on the remote control or the VCP40 phone to wake the endpoint up. Whenreceiving a call, the endpoint will be woken up automatically.You can change the automatic sleep time via the remote control or web user interface.You can also press the sleep key on the remote control to make the endpoint sleepimmediately.The automatic sleep time is described below:Parameter Description Configuration MethodAutomatic SleepTimeConfigures the inactive time (inminutes) before the endpointenter sleep mode.Default: 10 MinNote: During setup wizard, theautomatic sleep time feature isdisabled automatically. Toprotect the display device, youshould configure the automaticsleep time immediately.Remote ControlWeb User Interface