Yealink VC110 Admin Manual
Also see for VC110: Getting startedRecovery guideQuick start guideAdministrator's guideUser guide
                                                                                                                                                                                                                                         | |
Contents
|
Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint126To configure the site name via the web user interface:1. Click on Setting->General.2. Edit the site name in the Site Name field.3. Click Confirm to accept the change.The LCD screen of the display device and VCP40 will display the changed sitename.To configure the site name via the remote control:1. Select Menu->Basic.2. Edit the site name in the Site Name field.3. Press the Save soft key to accept the change.The LCD screen of the display device and VCP40 will display the changed sitename.Backlight determines the brightness of the LCD screen display, allowing users to readeasily in dark environments. Backlight time specifies the delay time to turn off thebacklight when the phone is inactive.You can configure the backlight time as one of the following types: Always On: Backlight is turned on permanently. 15 s, 30 s, 10 min, 20 min, 30 min, 1 Hour, 2 Hour, 3 Hour, 4 Hour: Backlight is turnedoff when the phone is inactive after a preset period of time. It is automaticallyturned on if the status of the phone changes or any key is pressed.The backlight parameter on VCP40 phone is described below:Parameter Description Configuration MethodBacklight Time Configures the backlight time of Web User Interface |
Related manuals for Yealink VC110
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine