Administrator’s Guide for Yealink Video Conferencing Systems156Parameter Description Configuration MethodIf Auto is selected, the system willselect the appropriate uplinkbandwidth automatically.DownlinkBandwidthSpecifies the maximum receivingbandwidth for the system.Default: AutoIf Auto is selected, the system willselect the appropriate downlinkbandwidth automatically.Remote ControlWeb User InterfaceTo configure bandwidth settings via web user interface:1. Click on Setting->Call Features.2. Select the desired value from the pull-down list of Uplink Bandwidth.3. Select the desired value from the pull-down list of Downlink Bandwidth.4. Click Confirm to accept the change.To configure bandwidth settings via the remote control:1. Select Menu->Call Features->Bandwidth Settings.2. Select the desired value from the pull-down list of Uplink Bandwidth.3. Select the desired value from the pull-down list of Downlink Bandwidth.4. Press the Save soft key to accept the change.Note The priority of bandwidth is as follows: System bandwidth>Contact bandwidth (refer to add localcontacts).For example: the system bandwidth is 512kbps, if contact bandwidth is set to a value greater than512bps, than the actual contact bandwidth will be 512bps. If contact bandwidth is set to a valueless than 512bps, than the actual contact bandwidth will be the value set by user.
