Configuring Network49Parameter DHCP Option DescriptionProtocolServersclient by IP address.Vendor-SpecificInformation 43 Identifies the vendor-specific information.Vendor ClassIdentifier 60 Identifies the vendor type.TFTP ServerName 66Identifies a TFTP server when the 'name' field inthe DHCP header has been used for DHCPoptions.Bootfile Name 67 Identifies a bootfile when the 'file' field in theDHCP header has been used for DHCP options.For more information on DHCP options, refer tohttp://www.ietf.org/rfc/rfc2131.txt?number=2131 orhttp://www.ietf.org/rfc/rfc2132.txt?number=2132.To make the system gather network settings via DHCP options, you need to contact yournetwork administrator to configure the DHCP server properly.DHCP feature parameters on the system are described below:Parameter Description Configuration MethodDHCPEnables or disables the system toobtain network settings from theDHCP server.Default: EnabledNote: If you change this parameter,the system will reboot to make thechange take effect.Remote ControlWeb User InterfaceHost NameConfigures the host name of thesystem.Default: BlankNote: When the system broadcastsDHCP DISCOVER messages, it willreport the configured host name tothe DHCP server via DHCP option12. Host name is optional, so it is nota mandatory configuration item. Formore information, contact yournetwork administrator.If you change this parameter, thesystem will reboot to make theWeb User Interface
