Configuring System Settings211To clear all camera preset positions via the remote control:1. Select Menu->Video & Audio->Camera General Settings.2. Select Clear Preset Position.3. Press OK to accept the change.Far-end Camera ControlLocal video is displayed on the display device of the far site during a call. For the best view, youcan enable the Far Control Near Camera feature to allow the far site to control the focus andangle of the local camera. You can also specify whether the far site is allowed to store and usethe local camera presets.Far-end camera control parameters are described below.Parameter Description Configuration MethodNot FECC incall(0~300s)Configures the duration time (inseconds) when far site cannotcontrol the local camera during acall.Default: 15If it is set to 15, the far site is notallowed to control the local camerain the first 15 seconds of the call.Web User InterfaceFar Control NearCameraEnables or disables the far site tocontrol the local camera.Default: EnabledRemote ControlWeb User InterfaceFar Set of CameraPresetsEnables or disables the far site tocreate presets for the local camera.Default: DisabledNote: It only works if the value ofthe “Far Control Near Camera” is setto Enabled.Remote ControlWeb User InterfaceFar Move toCamera PresetsEnables or disables the far site topoint local camera at pre-definedlocations.Default: DisabledNote: It only works if the value ofthe “Far Control Near Camera” is setto Enabled.Remote ControlWeb User Interface
