Yealink VC400 Administrator's Manual

Also see for VC120: Getting started Recovery guide Quick guide Administrator's guide User guide

Contents

Administrator’s Guide for Yealink Video Conferencing Systems220Parameter Description Configuration MethodNote: The auto recording feature isavailable only when the recordingfeature is enabled.To configure video recording via web user interface:1. Click on Setting->Video & Audio.2. Select the desired value from the pull-down list of Recording.3. Select the desired value from the pull-down list of Auto Recording.4. Click Confirm to accept the change.To record video when the system is idle via the remote control:1. Press to start recording and press again to stop recording.To record video during a call via the remote control:1. Do one of the following:- Long press to start recording and long press again to stoprecording.- Press More soft key to open More screen.Press or to scroll to USB Recording, and then press to start recording.Open the More screen, scroll to USB Recording again, and then press to stoprecording.