Yealink W52P Configuration Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Contents

Yealink W52P Configuration Manual Manual pdf 13 page image

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE 20-BD5392-00©2013 YEALINK PAGE 13 OF 543 BroadWorks ConfigurationThis section identifies the required BroadWorks device profile type for the Yealink W52PIP DECT Phone as well as any other unique BroadWorks configuration required forinteroperability with the W52P IP DECT Phone.3.1 BroadWorks Device Profile Type ConfigurationThis section identifies the device profile type to use when deploying the Yealink W52P IPDECT Phone with BroadWorks.The following table identifies the required BroadWorks device identity/profile type settingsfor interoperability between the W52P IP DECT Phone and BroadWorks. For anexplanation of the profile parameters, see the BroadWorks Device ManagementConfiguration Guide [2].For most of the following parameters, an “X” indicates that the parameter function issupported and/or required. If the item is blank, it is not supported. For items where text issupplied, the text content maps directly to the web page to add or to modify a deviceprofile type.Yealink W52P IP DECT Phone Identity/Device Profile TypeSignaling Address Type Intelligent Proxy AddressingStandard OptionsNumber of Ports 5Ringback Tone or Early MediaSupportLocal Ringback – No Early MediaAuthentication EnabledHold Normalization RFC 3264Registration Capable XStatic Registration CapableE.164 CapableTrustedAuthenticate REFERVideo CapableUse History-Info HeaderAdvanced OptionsRoute AdvanceWireless IntegrationPBX IntegrationAdd P-Called-Party-IDAuto Configuration Soft ClientRequires BroadWorks CallWaiting ToneAdvice of Charge Capable