Yealink W52P Configuration Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Contents

Yealink W52P Configuration Manual Manual pdf 28 page image

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W52P IP DECT PHONE 20-BD5392-00©2013 YEALINK PAGE 28 OF 54Example Device Management Options settings:Figure 5 Device Management Options Settings5.2.2.2.2 Define Device Profile Type FilesThis section describes the BroadWorks Device Management configuration necessary toidentify the configuration files and other files that the Yealink W52P IP DECT Phonedownloads.To define the files, configuration templates, firmware and other files the W52P IP DECTPhone uses, they must be uploaded to BroadWorks. Download the Yealink W52P CPEkit from BroadSoft Xchange at www.broadsoft.com/xchange. Extract the config files fromthe CPE kit. Obtain the firmware files directly from Yealink.The following table identifies the Yealink configuration files distributed with the CPE kit.File Name CPE Kit Template FileNameFile Type DescriptionSystem-level,Device-specific,Static, TimeZone AliasExamples:BWMACADDRESS.cfg%BWMACADDRESS%-W52P.cfg.templateDevice-specific This file contains device specificparameters that the phone needs toload.y000000000025.cfg y000000000025.cfg System-level This file contains system levelparameters that the phone needs toload.contactData.xml contactData.xml Static This file contains the contactinformation in XML format.blacklist.xml blacklist.xml Static This file contains the blacklist contactinformation in XML format.